DPAO d:facto Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Mikrofon DPAO d:facto herunter. DPAO d:facto 5 Seiten. Vocal mic

Seite drucken

Attenuation pad

The d:facto vocal has an attenua-

tion slide-switch at the back of the

mic head. Use a pencil or the like to

activate the attenuator and lower the

output of the head by 10 dB. Note:

This is to optimize performance with

the Wisycom handle and will not

change the max SPL handling.

Cleaning

Keep the microphone dry and away from exposure to water and

cleaning fluids. Do not use spray or fluid containing chemicals that

could remove static electricity on or close to the microphone. This

could cause permanent damage.

To clean the grid properly without the risk of causing damage to the

capsule, you have to disassemble the microphone head. This requires

a special tool, which can be obtained from DPA Microphones. Please

note that any attempt to take the microphone head apart is purely

at your own risk, and any damage caused in the process will not be

covered by warranty. Be careful not to touch or deform the inner

pop filter, as it will influence the performance of the microphone.

Wired to wireless

The d:facto vocal mic can be used both wired and wireless. It comes

with a handle for wired use, but the microphone body can be

unscrewed from the capsule head and exchanged with a wireless

handle from Wisycom. Please note that all specifications in this

manual apply to the wired handle solution.

Accessories included

DUA0134

d:facto vocal microphone clip

Accessories available

DUA0700

Windscreen

TB4000

Table Base

DUA0250

Floor Base

DUA0500

Stand Extension, 500 mm (20 in)

DUA0100

Stand Extension, 100 mm (4 in)

FAHV1B

d:facto handle

MMH4018V11B

d:facto vocal microphone head

DQA0025

Mic head opening tool

Frequency Response

Frequency response

-10

-20

-30

20 Hz

100

200

500

Measured at 12 cm (4.7 in)

Polar Pattern

5 dB

1 kHz

2 kHz

4 kHz

8 kHz

250 Hz

500 Hz

1 kHz

16 kHz