Daihen MWP-18 Gebrauchsanweisung - Seite 4
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Taschenlampe Daihen MWP-18 herunter. Daihen MWP-18 19 Seiten. Tig welding torch
Seite druckenIMPORTANT SAFEGUARD
2.3 All the personnel in and around the working area including an operator should wear
appropriate protection to protect themselves from arc rays, spatters, slag and noise
produced by welding.
WARNING
1) Wear lightproof glasses or a welder's shield helmet with a proper shade of filter when welding or
watching a welder work.
2) INSTALL ARC PROTECTIVE CURTAINS in between an operator and arc rays.
3) WEAR PROPER SAFETY GLASSES in work area at all times.
4) WEAR PROPER EAR PROTECTION.
5) WEAR PROPER BODY PROTECTION including woolen clothing, flameproof apron and gloves,
leather leggings, high boots and leather arm and shoulder gauntlets.
6) WEAR PROPER SAFETY GLASSES to protect eyes and skin from spatters and slag.
2.4 All the personnel in and around the working area including an operator should wear
appropriate protection to protect themselves from fumes and gases produced by
welding.
WARNING
1) KEEP YOUR HEAD out of fumes and DO NOT inhale any.
2) USE FORCED EXHAUST VENTILATION at the arc.
3) VENTILATE the area to prevent build-up of fumes and gases.
4) If ventilation is insufficient, USE APPROVED BREATHING DEVICES.
5) READ AND FOLLOW WARNING LABELS on all containers of welding materials.
6) Before use, READ AND UNDERSTAND the manufacture's instructions, Material Safety Data
Sheets (MSDSs), and follow your employer's safety practices.
7) To prevent gas poisoning and suffocation, use a local ventilator or a respirator specified by your
country's domestic laws.
8) Be sure to ventilate the area or wear a respirator by welding in a small place.
A well-trained watchman should observe the work.
9) Do not weld near the place where degreasing, cleaning or spraying is carried out. The heat and rays
of the arc can react with vapors to form highly toxic and irritating gases.
If welding is carried out there, harmful gases may be produced.
10) Toxic fumes and gases are produced when coated steel is welded.
Be sure to ventilate the area sufficiently or use a respirator.
● Install a lightproof wall where arc is generated.
● Wear appropriate eye, ear, and body protection.
● Arc rays may cause inflammation of eyes and burns on skin
● Spatter s and slag may cause eye troubles and burns.
● Noise may cause hearing problems.
● DO NOT inhale fumes and gases generated by welding.
● Ventilate the area sufficiently and wear a welder's shield mask if
necessary.
● Fumes and gases generated by welding have a harmful effect on
human body.
● Welding in a small area may cause suffocation due to the lack of
air.
−S3−
(continued)