DPCAV AV680RX Schnellstart-Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Empfänger DPCAV AV680RX herunter. DPCAV AV680RX 9 Seiten. 5.8ghz a/v receiver kit rev-b kit

Seite drucken

5.4

Do not use the SMA-RP connector

when installing dpcav.com's

#AWM5.8ANT economy patch

antenna (available separately).

Instead, directly solder the coax to

the RF port. See Figure 8.

Warning: While soldering, do not

disturb the tiny SMD component

installed on the input pad of some

RF modules.

Ensure the coax braid is not shorted

to the center coax conductor on the module's RF input. Perform a visual

inspection (do NOT use an ohmmeter).

COVER INSTALLATION: See Figure 9.

6.1

Using the 2-56 screws, install the four female-female standoffs to the top cover.

6.2

Place the top cover over the main PCB and attach using the four male-female

standoffs. The LED should protrude through the hole in the top cover. If the LED

has not been soldered, then now is the time to do that.

6.3

Attach the bottom cover using the 2-56 screws.

6.4

Apply the four rubber feet to the bottom cover.

AV680RX-Kit, Rev-B

Figure 9, Covers Installed

Page 5

Figure 8, Coax Installation