DPE Medical DST 8000 Auspacken und Montageanleitung

Blättern Sie online oder laden Sie pdf Auspacken und Montageanleitung für Fitnessgeräte DPE Medical DST 8000 herunter. DPE Medical DST 8000 19 Seiten.
Auch für DPE Medical DST 8000: Benutzerhandbuch (12 seiten)

Seite drucken

DST8000 Triple/Pro

Important: a. It is essential to read a few times all instructions before beginning.

b. If something is not clear or if you are uncertain how to proceed,

stop and contact support at:

C. pictures can vary, depending on your model

1. Each package has a drawing attached to it. Remove the pat from the package

only when needed for assembly

2. During assembly you will connect two low current electrical sockets/outlets, like this:

(Applicable to computerized model

3. Each part has its bolts and nuts for assembly in its package. You will find some extra

nuts and bolts packed with a note: "Spare".

4. Start by removing the top of the crate. It will be used as a ramp to roll off the main

part from the crate's floor.

5. Remove this wall first and take out part # 11. Put it aside. This part weight 33 kg.

(70 lbs.)

Note:

Two people needed to take out this parts

part # 11

Unpacking and Assembly Instructions

[email protected]

only)

-1-