Amprobe CT-500 Gebrauchsanweisung - Seite 9

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Messwertaufnehmer Amprobe CT-500 herunter. Amprobe CT-500 14 Seiten. 1000 a flexible neutral current transducer

Seite drucken

MeASureMentS

W

Warning

to avoid electric shock or personal injury:

• Do not use the transducer on a circuit with voltages higher than 600 V

CAT III and 300 V CAT IV.

• De-energize the installation on which current will be measured or adopt

safe operating procedures during application and removal of the current

transducer.

• Disconnect CT-500 from DM-5 by removing the CT-500 output terminal

plug. Do not pull CT-500 output cable.

to measure Ac current:

1. Connect CT-500 output terminal to DM-5 current input terminal (A1).

Observe the arrow marks for correct connection.