Carcam D4 Gebrauchsanweisung - Seite 3

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Dash Cameras Carcam D4 herunter. Carcam D4 9 Seiten.

Charging

The internal battery will begin charging once the power lead is connected to the camera. A small

battery display shows the level of charge in the battery. Please note that the battery will only power

the camera for a short time when the power lead is removed.

On/Off

The camera is set to switch on and off with the ignition through the 12V power lead. When the camera

is recording, it can be switched off at any time by pushing the on/off button (12). In such a scenario,

the camera will store the most recent recording in the DCIM folder. When the ignition is switched off,

the camera will power down within 5-10 seconds.

The programming menu is split between the Video Menu and the Set-Up Menu. You can only enter

the programming menu while the camera is not recording. Switch on the ignition and the camera will

power up and begin recording. Press the REC button (8) and recording will stop. Press the menu button

(2) once, to enter the programming menu in Video mode, or twice, to open the menu in Set-Up mode.

Note: if you are in either the Video, or Set-Up menus and you press the menu button (2), it will switch

to the other menu. Pressing button (4) opens the Video Menu.

VIDEO MENU

SIZE

button (4). Once an option is selected, the menu will revert to the video menu page. Carcam.ie has set

the video format to HD.

Navigate the Video Menu using the up and down

buttons (7) & (8) and open the desired option by

pressing button (4).

The size menu determines the size and quality of the

Front camera recording with three options of: VGA, D1

& HD available. Remember the higher the quality of

recording the more space required on the memory

card, but HD is recommended and you should have circa

4 hours recording capacity on the memory card using

the HD setting. Press button (4) to see the options and

navigate these using buttons (7) & (8). Blue is the colour

which highlights an option and confirm the option using