Carcam G-800 Installations- und Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Installations- und Benutzerhandbuch für Dash Cameras Carcam G-800 herunter. Carcam G-800 13 Seiten.

1. Product Features

1. Adjustable 170 degree ultra-wide angle front lens.

2. The rear camera will work automatically once plugged in.

3. When the ignition is switched on, the device will automatically turn on and begin to

record.

4. Seamless loop recording means the device will not miss any data while driving.

5. Once the rear camera is connected into the reversing light circuit (professional

recommended), when reverse is selected, the screen will display the rear camera view

and a guide grid for safer reversing.

6. The camera also supports manual reversing function. The screen will automatically

display dual cameras (PIP) on start up. Pressing the "Up" button will switch to rear

camera only, which can assist with reversing in the absence of the connection in (5) above.

7. The mirror houses a 4.3inch high definition LCD screen.

8. G-Sensor function. In the event of an accident involving the vehicle, the video will be

saved and not over written in the loop recording cycle.

9. Parking Sensor. The camera will switch on and record for circa 20 seconds in the event

of the car being hit in a car park situation.

10. Motion sensor. When parked the camera will switch on and record if the front lens

detects motion outside.

11. LED lights around the front lens to assist with night vision in close proximity.

12. Stylish look & easy installation.

2. Appearance of the interface

1. LCD Screen

2.Power Button

3.MENU Button

4.MODE Button

5.Up Select Button

6.Down Select Button

7.OK Button.

8. GPS (Non use).