Fomei FY3058 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Beleuchtungsanlagen Fomei FY3058 herunter. Fomei FY3058 16 Seiten. Battery flash, flash trigger

Seite drucken

Power On/Off

Press and hold power switch to turn on/off the unit. To reduce battery power use, TX TTL

is designed to go into Sleep mode after 30 minutes of non-activity and to turn off automa-

tically after 40 minutes of non-activity.

Flash control with TS-5 wireless controller/trigger

•

Attach TS-5 to Hot-shoe, turn on your camera and TS-5. If the flash does not get

camera brand automatically after Ts-5 is on, press and hold the simultaneously for 3

seconds to select different brand.

Hold these buttons simultaneously for 3 second to select different brand.

<TTL> Mode

•

Set camera scene modes to <Av> (aperture priority), <Tv> (shutter priority or <M>

(manual) mode to work with TTL.

<M> Mode

•

Set the selection mode <TTL>,<M> to M on TS-5, and adjust the accurate power on

TS-5.

Channel settings

•

Press „CH" button until the numeral digit starts blinking.

•

Then, press the up and down buttons to set the channels from 1~80.

•

Set TS-5 wireless trigger channel to the same channel on the TX TTL flash for ope-

ration. After pressing CH on the wireless trigger, push the up and down buttons to

change channel

Group settings

•

Designate up to 4 groups and these groups can be controled at the same time.

•

TS-5 wireless trigger group should be set to the same designated group in TX TTL

flash in order to operate the flash.

•

Press the A, B, C and D buttons on wireless trigger for settings.

C. PRODUCT USAGE