Fomei Digitalis 200 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kamera-Blitz Fomei Digitalis 200 herunter. Fomei Digitalis 200 8 Seiten.

Seite drucken

5. Specifications

Model
Lamp output /Ws/
Flash charge/s/
Flash length/s/
Flash colour temperature/K/
Test bulb output /W/
Test lamp colour temperature
Dimensions
Weight
Order number
6. Using your flash head
1.
The light intensity, power output and all other settings are set to minimum levels. These are the factory
default settings .
2.
Before you switch the flash on, check the light intensity of the modelling lamp and flash.
3.
Connect the synchro cable to the synchro connector.
4.
Switch the equipment on. The blue control light comes on.
5.
Never forget to discharge the residual voltage before switching the flash off.

7. Maintenance

1.
How to change the modelling lamp
- Before changing the lamp, let the equipment cool down.
- Be careful not to leave dirt or fingerprints on the lamp. After lamp replacement, clean the lamp with
soft and dry cloth.
2.
How to change the fuse
- First, disconnect the AC input cord.
- Open the fuse cover and remove the fuse.
- Check the fuse and if it is broken, replace with a new one.
3.
Flash maintenance
- During storage, keep the flash lamp free from dust and dirt.
- Dirt and grease on the reflector and on the flash lamp will shorten their operating life. Dirt decreases
the colour temperature of the emitted light. Clean with a soft, dry cloth.
* Notes: If the voltage in the wall outlet is lower than the required voltage, full recharge may not be possible.
Check the wall outlet voltage before connecting the equipment. The manufacturer reserves the right
to change the specification of the product, without previous notice whatsoever.
Digitalis 600
600
0.1 – 2.2
1/1700
5600
100
3200
38.5 x 11.5 x 12
38.5 x 11.5 x 12
2.7
FY7772
5
Digitalis 400
Digitalis 200
400
0.1 – 1.9
1/2300
5610
100
3200
38.5 x 11.5 x 12
2.5
FY7771
200
0.1 – 1.7
1/4000
5580
100
3200
2.3
FY7770