fomex HD1000 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Beleuchtungsanlagen fomex HD1000 herunter. fomex HD1000 12 Seiten. Hd series

Countermeasure on breakdown

Status

Slave is

Slave button is turned OFF.

impossible.

Slave sensor is out of the light

of flash.

Too strong light is on slave sensor.

Synchro Cord

Due to dust or other material on

doesn't

synchro jack, it causes contact's

become

defective.

tuned.

Synchro cord has defective contacts

and is disconnected.

There's no

Power supply is blocked.

reaction at all.

Others

Contact our company or its seller.

Expected cause

Point of checking and action

Check if slave button is turned ON.

After turning the lighting by 180° so as

for turning sensor to be shown, and than

operate it again.

Block direct ray of light or bright light

from slave sensor.

After checking synchro jack, remove

other material.

Replace synchro cord.

(Check if it can radiate by pressing

ready button.)

• Check if power cord is well connected.

• Check if the contact of socket is loose.

• Check if fuse is disconnected.

HD SERIES