Fomis TNS-0163 Anleitung Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Controller Fomis TNS-0163 herunter. Fomis TNS-0163 9 Seiten. Switch bluetooth controller
Seite drucken
console paired previously; if the back connection is not successful within 8 seconds, it will enter into the auto sleep status.
③
在主机和手柄休眠时，按 HOME 键可唤醒主机，如果没有唤醒成功，可再次按下 HOME 按键唤醒主机和
手柄。
③
Press the HOME key to wake up the console when the console and controller are in dormant state; if not successful,
you can press the HOME key again to wake up the console and controller.
6、NFC 功能：
6 NFC Function:
6.1、因 NFC 感应区在右手柄 3D 处，读卡时需将 NFC 卡贴在右手柄 3D 帽正上方，读取时间 5-8
秒。
6.1 As the NFC induction zone is at the right controller 3D, you should make the NFC card cling right
above to the right controller 3D cap, and the read time is 5-8s.
7、充电指示与充电特性：
7. Charging Indication and Charging Characteristics:
手柄充电时：充电 LED 指示灯亮起,充满电后 LED 灯灭灯。
When the controller is charging: the charging LED lamp lights up, and the LED light turns off when it is
fully charged.
8、自动休眠：
8 Automatic Sleep:
8.1、连接 Switch 模式：
8.1 Connection Mode to Switch:
Switch 主机屏幕关闭或关机,手柄自动断开连接进入休眠。
Turn off or power off the screen of the Switch host to make the controller automatically disconnect and
sleep.
8.2、蓝牙连接模式：
8.2 Bluetooth Connection Mode:
短按蓝牙对码键后蓝牙断开连接进入休眠。
The bluetooth is disconnected and enters sleep mode after the bluetooth code key is pressed shortly.
8.3、5 分钟之内手柄没有任何按键按下则自动进入休眠(包括重力感应不动)。
8.3 If any key of the controller is not pressed within 5 minutes, it will automatically go to sleep
(including the gravity sensor does not move).
9、电池低电量报警：
4