Amroad DP3211 Installationshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Installationshandbuch für Intercom System Amroad DP3211 herunter. Amroad DP3211 15 Seiten.

Installing Procedures

Install Main Unit

1. Back Plate installs done.

2. The tenon of MainUnit levels at mortise.

3. Follow the direction of the figure to put

down the Main Unit vertically.

4. Secure the Main Unit by fastening the 2

screws (M3-L6) on the bottom. Then, the

installation would be completed.

5. The protective film on the Main Unit

should not be torn up during installation.

Do not tear up the protective film until

new residents move in the house.

Observe the bottom of Main Unit and Back

Plate.



If the Back Plate on the bottom of the

Main Unit is raised, it means that Main

Unit and Back Plate don't meet closely.

The waterproof function is not good. (A

little external force from top of the Main

Unit may improve this situation.)



However, if the bottom of Main Unit and

back plate meet closely, it means that

the DP3211 will be with better waterproof

function.

AMROAD DP3211