Comelit Icona 6601W/BM Technisches Handbuch - Seite 13
Blättern Sie online oder laden Sie pdf Technisches Handbuch für Monitor Comelit Icona 6601W/BM herunter. Comelit Icona 6601W/BM 17 Seiten. 2-wire door entry monitor
Auch für Comelit Icona 6601W/BM: Technisches Handbuch (20 seiten), Benutzerhandbuch (7 seiten), Benutzerhandbuch (18 seiten)
Seite drucken
Generic actuator, coded actuator
Generic actuator: button programming
1. Take note of the S1 DIP-switch settings.
2. To enter programming mode, set S2 DIP-switch 6 to ON.
» the LED
flashes
3. Refer to the table
"Basic configuration"
corresponding to the button you want to program appears, then set the S2 DIP-switches.
4. Set all the S1 DIP-switches to the ON position.
5. Press and release the button to be associated with the function.
» Correct procedure indication: the LED
6. Exit programming mode by setting S2 DIP-switch 6 to OFF.
» LED
switches off
7. Set S2 DIP-switches 1-2-3-4 to ON.
8. Return S1 DIP-switches to the original combination.
Coded actuator: button programming
1. Take note of the S1 DIP-switch settings.
2. To enter programming mode, set S2 DIP-switch 6 to ON.
» the LED
flashes
3. Refer to the table
"Basic configuration"
corresponding to the button you want to program appears, then set the S2 DIP-switches.
4. Set the S1 DIP-switches with the desired code, according to
5. Press and release the button to be associated with the function.
» Correct procedure indication: the LED
6. Exit programming mode by setting S2 DIP-switch 6 to OFF.
» LED
switches off
7. Set S2 DIP-switches 1-2-3-4 to ON.
8. Return S1 DIP-switches to the original combination.
to identify a DIP-switch combination in which the actuator function (ACT)
flashes for a few seconds and a confirmation tone sounds.
to identify a DIP-switch combination in which the actuator function (ACT)
"Addressing table" on page 17
flashes for a few seconds and a confirmation tone sounds
S2
S1
S2
S2
S2
13