AMS TSL2571 Series Schnellstart-Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Zubehör AMS TSL2571 Series herunter. AMS TSL2571 Series 5 Seiten. Light-to-digital ambient light sensor

Seite drucken
1

Out of the box

Each TSL2571 EVM comes with the following components:
Controller board v2.1
•
TSL2571 Daughterboard
•
USB Cable with A connector and mini B connector
•
Flash Drive with Application Software and Documents
•
Quick Start Guide (not shown)
2

Software installation

Most PCs should have one or more Universal Serial Bus (USB)
ports. Install the
ams
flash drive into an unused USB port.
1.
Double-click the Setup.exe file on the flash drive, or
2.
Click Start -> Click Run -> Type E: setup.exe and press Enter. IMPORTANT: Use the
appropriate drive letter in the above command to install the software. Flash Drive will
commonly be assigned the next available drive letter for example C: hard drive D: CD-ROM
E: flash drive
The Digital Light Sensor Setup Wizard will open and guide you through the installation of the
TSL2571 host software. (Figures 2 through 8). To re-install, run the setup.exe file again. To remove
the software from your computer, Select
the Windows Control Panel (Figure 9).
ams
-> TSL2571 EVM -> Uninstall TSL2571 EVM or use
page 3/5