AmScope B200 Betriebsanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Mikroskop AmScope B200 herunter. AmScope B200 16 Seiten. B series biological microscope

4.2 Placing specimen (Shown in Fig.3)

Please place specimen on the stage, and the face with cover glass should be up, then

clip it with clamp. Clipping specimen should be careful in order to avoid spoiling

glass. Place specimen on the stage levelly, and make it into optical path by adjusting

vertical moving knob and horizontal moving knob.

4.3 Condenser (Shown in Fig.3)

4.3.1 Condenser up-down

Turn the condenser up-down knob to adjust the distance between condenser front and

the specimen, and change the equal illumination to obtain the best brightness.

4.3.2 Iris aperture adjustment

Diopter Ring

Stir the handle of iris aperture of condenser to

Eyepiece

adjust size of iris aperture for adjusting the

Eyepiece Tube

Interpupillary

contrast of the specimen.

Distance S cale

4.4 Interpupillary distance and diopter

Fig.5 Interpupillary Distance

Adjustment And Diopter Ring

adjustment (Shown in Fig.5)

4.4.1 Interpupillar distance is different for everyone, so interpupillary distance should

be adjusted before using binocular microscope. Please take the two eyepiece tubes to

turn until the bright rings observed by two eyes are in superposition entirely.

▲B100 monocular microscope don't need to be adjusted.

4.4.2 Diopter adjustment

As focusing for binocular, user should observe right eyepiece with right eye, and

make the right eyepiece clear by focusing adjustment, then observe the left eyepiece,

at the same time, adjust the diopter ring of the left eyepiece tube to make the image of