AmScope DM140 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Mikroskop AmScope DM140 herunter. AmScope DM140 12 Seiten. Portable digital microscope

Using a Micro-SD Card to Save Images

By using a Micro-SD card (not provided, please buy it separately), you can

save images and videos to review later or output to a computer or other

device .

Insert the Micro SD card in to the TF slot on top back of the monitor.

Push it in until you hear a click. (If you don't push it in far enough, it will be

ejected.) An icon

The Mode button (2 from the Figure 1, marked with an 'M') can be used to

cycle between three modes: video (VIDEO), still image (IMAGE), and review (CARET-SQ).

In video mode, press the OK button (5 from the Figure 1, VIDEO key on

the remote has the same function) briefly to begin recording (the icon

becomes to

top right. To stop recording, hit the OK button again.

Note: do not keep the OK button while starting or stopping a recording,

just press and release.

In still image mode, press the OK button (5 from the Figure 1) briefly to

capture an image. eye Icon would appear at the top middle for a second,

when an image has been captured.

Press Capture button (6 from the Figure 1, icon Camera-R on the remote has the

same function) to capture images while the microscope is recording.

If you capture the image by this way, the resolution of the image could

be neither 1080P or 720P, depends on which you choose for the video

resolution, FHD or HD.

To review and manage images on the display, use the Mode button to

select review mode. Use the Up and Down buttons to cycle through the

pictures and videos.

To play a video, press the OK button. Press the OK button again to pause.

Hit the Mode button again to exit playback.

will appear at the top right side of the display.

). The elapsed time in the recording will appear at the