AMSEC ESL20XL Betriebsanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Schlösser AMSEC ESL20XL herunter. AMSEC ESL20XL 10 Seiten. Electronic lock

Seite drucken

American Security Products Co.

Combination Changes in Multi-User Mode

One of the strengths of an electronic safe lock is the quick and easy changing of the combination(s). This adds to security

because you can change it at will if you suspect your combination is known by others.

The combination change method for the primary User (Master User) can be done two ways, with or without a User

Number. All combination changes require and authorization code and two entries of the new combo.

In the event that F60 (Subordinate Combo Change) is set to Disable (F60=0), only the Master Code can

authorize a code change for a Subordinate User.

Each Subordinate User is assigned a single digit "User Number" (1 thru 8) during enrollment by the

Master User. Master User is User 0. Armored Car User is User 9.



Master User Code change - At any time, the Master User combo can be changed by keying:

C - # - (Old Master Code) - # - (New Master Code) - # - (New Master Code) - #



User Code Change and F60=1 - Changing of any combination, including the Master User Code, can be

changed by the following sequence:

C- # - (User No.) - # - (Old User Code) - # - (New User Code) - # - (New User Code) - #



User Code Change and F60=0 - In the event F60 is Disabled (F60=0) or you are adding a new User, then the

combo change must be authorized with the Master User's code:

C- # - (User No.) - # - (Master Code) - # - (New User Code) - # - (New User Code) - #

Combination Change Examples

The Master Combo is 159260 and you wish to change it to 918273. Do the following:

C-#-0-#-159260-#-918273-#-918273-#

User 5's combination is 342312 and you wish to change it to 768798

C-#-5-#-342312-#-768798-#-768798-#

User 5's combination is unknown and you wish to set it to 768798, the Master Combo is 159260

C-#-5-#-159260-#-768798-#-768798-#

Feature Setting with Function Codes.

The ESL20XL's advanced features are controlled only by the Master User, and are set using Function Codes.

A function can be turned on and off, or set, using the Function Code with the Master User code as authorization

for changing or setting the function. A Function Code is a 2-digit code that is associated to a particular setting.

Each Function Code has a default, or standard setting, which is in the lock when there have been no changes

or after a Function Reset (F99) has been executed. They are as follows.

Function Code List

Function

Revision A

ESL20XL Operating Instructions

Function Description

Time Delay Mode Enable/Disable

Set Time Delay Period

Set Open Period

Multiple User Mode Enable/Disable

Add/Enable a User Combo

Disable a User Combo

Disable All Users

Duress Mode Enable/Disable

Dual Combo Mode Enable/Disable

Enable/Disable Two Subordinate Combos Opening

Armored Car Time Delay Bypass Enable/Disable

Enable/Disable Subordinate Authorization of TDL Bypass

External Control Port Enable/Disable

Subordinate User Combo Change Enable/Disable

Reset All Functions to Default settings

Page 5 of 10

C-#-159260-#-918273-#-918273-#

Enable=1, Disable=0

Released Aug. 9, 2018

Setting

Range

Default

1 or 0

1 to 99

1 to 9

1 or 0

1 to 8

1 or 0