Electrolux 241857202 Handbuch für Gebrauch und Pflege - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für Gebrauch und Pflege für Kühlschrank Electrolux 241857202 herunter. Electrolux 241857202 13 Seiten. Top mount refrigerator

Seite drucken

NOTE

Some models have "pocket" handles, which are recessed into

the sides of the door. On these models, only the hinges will

need to be reversed.

TO REMOVE fREEzER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Remove two screws attaching handle to bottom of

freezer door.

2. Remove short trim piece by sliding trim straight up and

off of handle bracket.

3. Remove screw attaching

top of handle to door.

4. Self-Adhesive Nameplate

Models: Gently peel off

nameplate from door and

reapply over old handle

holes.

TO ATTACH fREEzER

HANDLE:

1. Reinstall handle on

opposite side, using same

hole as nameplate.

2. Attach handle to bottom of door.

3. Slide trim piece straight down onto handle bracket.

TO REMOVE fREEzER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Remove two screws

attaching handle to

bottom of freezer

door.

2. Remove button plug

using edge of putty

knife.

3. Remove screw on

side of freezer door

and remove handle.

TO ATTACH fREEzER HANDLE:

1. Secure side of handle to door and replace button plug.

2. Secure handle to bottom of door.

TO REMOVE fREEzER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Remove two screws attaching handle to bottom of

freezer door.

2. Swing bottom of handle away from the door and slide

handle straight up and off of dovetail button.

3. Remove screw and dovetail button and install on other

side, using the same holes as nameplate.

DOOR REMOVAL / REVERSAL INSTRUCTIONS

Nameplate

Trim

Screw

Handle

Self Adhesive

Nameplate

(some models)

Screw

4. Self-Adhesive Nameplate Models: Use putty knife to

gently peel off nameplate from door and reapply over old

handle holes.

TO ATTACH fREEzER

HANDLE:

1. Start with handle offset

away from door. Place top

of handle over dovetail

button, swing handle into

upright position and pull

downward, locking it into

place.

2. Secure bottom of handle

with two screws removed

earlier.

TRIM REMOVAL (fULL-LENGTH TRIM

MODELS ONLY)

In some models, the refrigerator door has a full length trim piece

which continues from the bottom of the handle to the bottom

of the door. The top of the trim attaches to the handle bracket

(Figure 1) or fits around the base of the handle (Figure 2). An

adhesive "trim lock" is positioned about halfway down. The

bottom of the trim is held in place by either an adhesive trim

lock, or a trim lock with two prongs inserted into a hole on the

face of the door.

TO REMOVE TRIM:

1. Remove trim by gently pulling trim lock areas out and

away from door.

2. When trim is free from door, slide the trim straight down

and away from base of handle.

NOTE

For models with short handle trim, remove by sliding trim

straight down and off of handle bracket.

TO REMOVE REfRIGERATOR HANDLE:

(Handles may be easier to reverse while doors are off.)

figure 1 Style Handles

1. Remove two screws attaching handle to top of

refrigerator door.

2. Remove screw attaching bottom of handle to door.

3. Remove two hole plugs and hinge pin plug on top of

door and install on opposite side. Use Phillips head

screwdriver to remove plastic screw plug from front of

door and install on opposite side

figure 2 Style Handles

1. Remove two screws attaching handle to top of

refrigerator door.

2. Swing top of handle away from door and slide handle

down and off of dovetail button.

Self Adhesive

Nameplate

(some models)

Dovetail

Button

Screw

Handle

Lock Handle

over

Dovetail Button

Screw