Electrolux A01061201 Handbuch für Gebrauch und Pflege - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für Gebrauch und Pflege für Kühlschrank Electrolux A01061201 herunter. Electrolux A01061201 20 Seiten.

Seite drucken

Installation

Required Tools

You will need the following tools:

Tools Necessary:

Phillips Head

#2 Square

Drive Head

Socket

Wrench Set

Socket

Wrench Set

This Use & Care Guide provides general

installation and operating instructions

for your model. We recommend using a

service or kitchen contracting professional

to install your appliance. Use the unit only

as instructed in this Use & Care Guide.

Before starting the appliance, follow

these important first steps.

Location

•

Choose a place that is near a

grounded, non-GFCI, electrical outlet.

Do Not use an extension cord or an

adapter plug.

•

If possible, place the unit out of direct

sunlight and away from the range,

dishwasher, or other heat sources.

•

The appliance must be installed on a

floor that is level and strong enough

to support a fully loaded unit.

CAUTION

DO NOT install the appliance where the

temperature will drop below 40°F (13°C) or

rise above 110°F (43°C). The compressor

will not be able to maintain proper

temperatures inside the unit.

DO NOT block the toe grille on the

lower front of your appliance. Sufficient

air circulation is essential for the proper

operation of your unit.

Adjustable

Wrench

(OR)

and

Adjustable

3/8" Fixed

Wrench

NOTE

If your appliance is placed with the door

hinge against a wall, you may have to

allow additional space so the door can

be opened wider.

Installation

•

Allow the following clearances

for ease of installation, proper

air circulation, and plumbing and

electrical connections:

Sides

Top & Back

•

Allow for trim kit if it to be installed

with the unit.

NOTE

The appliance doors are designed to

shut by themselves within a 20-degree

opening.

1" (25 mm)

(25 mm)

⅜"

(10 mm)

⅜" (9.5 mm)

1" (25.4 mm)

Refrigerator

⅜"

(10 mm)