AIRSONICS GXT542U Handbuch zur Schnellinstallation - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Extender AIRSONICS GXT542U herunter. AIRSONICS GXT542U 11 Seiten. Gigabit wi-fi extender
Seite drucken
B.
Insert one end of an Ethernet cable into the Video LAN port
of the ONT/ RG with the other to the GXT542U's RJ-45 port.
Section 2
Multicast (IPTV) Video Bridge Client Installation
After installing a GXT542U AP per Section 1, Clients can be added
using the steps below:
Step 1 – Unit Mode Configuration
A.
Set the unit mode switch at the back of the unit to STA
(Right position) as illustrated below.
Step 2 - Power and LEDs
A. Plug in the 12V A/C adapter and connect it to the
GXT542U STA unit. Verify the AP / STA LED is GREEN
indicating Client (STA) mode.
DO NOT connect both
Ethernet ports on the AP to the
same subnetwork ports on the
ONT/Gateway as this will
create a loop and disrupt
traffic.
Home Gateway or
Cable/DSL Modem
3