Bosch Ascenta SHX3AR75UC Schnellstart- und Sicherheitshandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Schnellstart- und Sicherheitshandbuch für Geschirrspüler Bosch Ascenta SHX3AR75UC herunter. Bosch Ascenta SHX3AR75UC 7 Seiten.
Auch für Bosch Ascenta SHX3AR75UC: Gebrauchsanweisung Handbuch (40 seiten), Betriebsanleitung (22 seiten)
Seite drucken
ADD RINSE AID
This dishwasher is designed to be used with rinse aid, which enhances drying
results and shine.
• Add rinse aid before first use and when
the Add Rinse Aid indicator light on the
control panel illuminates.
• Lift tab to open the rinse aid reservoir
and add liquid rinse aid into the oval
until it is full, avoiding air vent. Wipe up
any excess rinse aid that may puddle.
Tip: Remove lid of rinse aid bottle for
easier pouring.
The amount of rinse aid dispensed can be
set in 4 levels. Only change the setting if
streaks remain on the dishes (lower the amount), or if dishes are not getting dry
enough (increase the amount).
Setting
Factory setting Description
Rinse Aid
Medium
Off/Low/Medium/
High
Beep at cycle end
Medium
Off/Low/Medium/
High
Intensive drying
Off
Off/On
ADJUSTING THE SETTINGS
First Steps to adjust any setting:
Open the door and press the ON/OFF button.
1.
2. Hold down button > and press START button until the clean indicator and
the sanitized indicator lights flash.
Release buttons, then follow steps below to adjust specific setting.
3.
A. To adjust the rinse aid and beep settings:
Keep pessing the button > until the rinse aid refill indicator light flashes for
1.
ther rinse aid setting. Or to change the beep setting, press until rinse aid
refill, clean and sanitized indicators flash. Displays A and B are lit (= Setting
medium, factory setting.)
2. Press the button < until the desired setting is selected. Display A = Setting
low, Displays A, B and C = Setting High and no displays lit is off.
Press START button to save the setting.
3.
B. To turn intensive drying on:
Keep pressing button > until the Clean and Sanitized lights flash.
1.
2. Press button < until the display A is lit.
8
Press Start button to save the setting.
3.
max
air
vent
Dispenses the amount of rinse
aid, which affects drying (see
above).
Adjust the volume for the beep at
the end of the cycle.
Improved drying for glasses and
plastic, by increasing the tempera-
ture and length.
MAINTENANCE TIPS
Clean surfaces with damp cloth and mild soap.
NOTICE: Do not use abrasives or bleach based cleaners. Do not use stainless
steel cleaner on black stainless or anti-finger print surfaces.
Clean the filter 3-12 times a year, depending on usage.
Unscrew the Large Object Trap as illustrated and remove the entire filter
1.
system.
Remove the micro-filter from the fine filter, rinse the filters under running
2.
water clean with a soft brush.
Reinstall the filter system in reverse sequence, align arrows.
3.
2
1
FREQUENTLY ASKED QUESTIONS
Q
Why is food left on dishes?
:
A
It is possible the dishes do not have adequate clearance between them.
:
Also, be sure nothing is blocking spray arm and that the filter is clean. Select an
intensive cleaning cycle.
Q
Why does the cycle run a long time?
:
A
1. Sensors in the dishwasher automatically increase the cycle time to ensure a
:
good wash when heavy soil is detected.
2. Incoming water may not be hot enough and dishwasher has to heat it.
Q
Why is E:XX (X can be any number) displayed?
:
A
This is an error code. For example, E:22 indicates there is water in the sump
:
because the filter is blocked or needs cleaning. See the Use and Care Manual
for a list of error codes.
To access the full Use and Care Manual, go to:
www.bosch-home.com/us/service/get-support/owner-manuals.
9