Bosch Benchmark Series Service-Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Service-Handbuch für Geschirrspüler Bosch Benchmark Series herunter. Bosch Benchmark Series 45 Seiten. Built-in wall ovens
Auch für Bosch Benchmark Series: Service-Handbuch (36 seiten), Installationshandbuch (32 seiten), Kurzreferenz-Handbuch (4 seiten), Installationsanleitung Handbuch (40 seiten), Schnellstart- und Sicherheitshandbuch (13 seiten)

Bosch Benchmark Series Service-Handbuch
58300000181895 ARA EN A

2 IMPORTANT SAFETY INFORMATION

Before starting to service an appliance, familiarize yourself with all
safety information and precautions included in this manual.
2.1

Safety Before Servicing the Appliance

WARNING
!
Before disassembly, removal, or installation of any
component...
 Turn off electrical power by removing the power cord from
the electrical outlet or putting the circuit breaker in the
position.
 Be sure the entire appliance has cooled to a safe
temperature.
WARNING
!
Use of replacement parts...
Use only authorized replacement parts for this appliance. Use of
unauthorized substitutions may cause non-compliance with safety
standards set for home appliances, will void the warranty, and may
create safety hazards resulting in damage, bodily injury, or death.
Copyright by BSH Home Appliances Corporation
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
JUNE 2014
!
Electrical hazards...
OFF
!
Sharp components...
This appliance has sheet metal parts and components which may
have sharp edges. Avoid injury by handling parts with care and using
adequate protective measures, such as wearing gloves.
1901 Main St ▪ Suite 600 ▪ Irvine, CA 92614
Service Manual for Bosch Benchmark Series Built-in Wall Ovens
WARNING
 Before servicing the appliance, remove electrical power by
either disconnecting the power cord from the wall receptacle
or by putting the circuit breaker in the
 If tests must be conducted while the appliance is live, always
use a residual-current-operated circuit breaker. The
protective conductor connection must not exceed the
recommended values.
 When repairs are complete, perform a function test in
accordance with the appropriate regulations.
 Do not, under any circumstances, cut or remove the separate
ground wire or the third (ground) prong from the power cord
plug.
 Improper grounding or reverse polarization will cause
malfunction, which can damage the appliance and create an
electrical shock hazard. Make sure the circuit is properly
grounded and polarized in accordance with applicable local
codes and ordinances. Receptacle replacement shall be in
accordance with the National Electric Code.
WARNING
position.
OFF
Page 4 of 45
800 944-2904