Bosch DISHWASHER Betriebsanleitung - Seite 12

Rack Accessories

Flip Tines

The racks consist of tines that can be folded down depending on what you

may need to load in the rack. To fold down, grasp the folding tine and

release from notch. Push folding tine downward to desired position as

shown in Figure 6.

Extra Tall Item Sprinkler

If an item is too tall to be placed in the bottom rack even with the top rack

in the raised position, remove the empty top rack by pulling it out of the

dishwasher until it stops. Pull the front of the rack upward and outward

until the rollers are completely free of the roller guides.

Set the top rack aside. Push the roller guides back into the dishwasher.

Insert the Extra Tall Item Sprinkler into the top rack spray outlet and turn

the sprinkler clockwise to lock into position. See Figure 7.

Note: Keep the vent on the tub's right side clear by placing tall items such as

plastic cutting boards and tall baking sheets on the bottom rack's left side

or center.

To avoid dishwasher damage, do not reinstall the top rack without removing

the Extra Tall Item Sprinkler.

Plastic Item Clips

Light-weight plastic accessories (cups, lids, etc.) can be held securely by

the plastic item clips. See Figure 8.

3-Step RackMatic®

The height of the upper rack can be adjusted in 3 steps to create more space.

Pull the top rack out of the dishwasher until it stops.

To lower the rack, push the lever inward then upward.

To raise the rack, hold the basket on the sides of the upper rack and lift up.

Note: Before pushing the top rack into the dishwasher, ensure the rack

height is the same on both sides. If the height is not the same on both

sides, the dishwasher door will not shut and the top rack spray arm will not connect to the water inlet.

NOTICE

Figure 6

Figure 7

Figure 8

Figure 9