Bosch SGV 57T23 Gebrauchsanweisung Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung Handbuch für Geschirrspüler Bosch SGV 57T23 herunter. Bosch SGV 57T23 33 Seiten.

Water softener

In order to rinse dishes and glasses

satisfactorily, the dishwasher requires soft

water, i.e. containing little or no lime,

otherwise water stains will be left behind

on crockery and glasses, etc.

If the tap water exceeds a certain level of

hardness, it must be softened, i.e.

decalcified, so that it can be used in the

dishwasher.

This is achieved by adding a special salt

to the water softener inside the

dishwasher.

The water softener, that is the required

amount of salt, is set up according to how

hard the tap water is.

Setting up the water softener

Determine the level of hardness of your

tap water. Your local water company or

service agent can help you with this.

Identify setting from the following water

hardness table.

Water hardness table

Downloaded from DishWasher-Manual.com Manuals

Hold down programme button B and

switch on the

release both buttons.

The LED for button B flashes and the

digital display displays the factory

setting

To change the setting,

press programme button B .

Each time the button is pressed, the set

value increases by 1; after

setting goes back to

Switch off the main switch

The chosen setting has now been

stored.

Approx. 4 litres of water are required for

regenerating the water softening system.

The overall water consumption per load

can therefore be increased by between 0

and a maximum of 4 litres according to the

water hardness setting.

main switch, then

, the