DRAGONFIRE 01-2127 Einbauanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Einbauanleitung für Zubehör für Kraftfahrzeuge DRAGONFIRE 01-2127 herunter. DRAGONFIRE 01-2127 3 Seiten. Rear smash bumper for the maverick & maverick max

Seite drucken

Step 4: Remove the rear factory plastic

support bracket. Retain the outer two

screws; they will be re-installed after

bracket has been removed. See Figure B

& C above for reference

Step 5: Remove rear plastic panel by

removing mounting screw on backside of

panel. Set hardware aside it will be re-

used. In some cases aftermarket exhaust

will need to be removed for installation of

the rear bumper. See Figure D

Step 6: Remove outer two screws from

taillight plastics. Set hardware aside it will

be re-used. See Figure E

Dragonfire Racing