DRAGONFIRE DFR-5TMWM-B Einbauanleitung

Blättern Sie online oder laden Sie pdf Einbauanleitung für Zubehör für Kraftfahrzeuge DRAGONFIRE DFR-5TMWM-B herunter. DRAGONFIRE DFR-5TMWM-B 2 Seiten. Can-am maverick winch mount kit

Seite drucken

DragonFire Racing

3191 N. Washington St. Suite 2

Chandler, AZ 85225

1 (800) 708-9803

WWW.DRAGONFIRERACING.COM

Congratulations on your purchase of the DragonFire Winch Mount Kit for the Can-Am Maverick. Designed to work

with the DragonFire RacePace Front bumper, this mounting kit gives you the functionality of a winch with the rugged

and race ready appearance that only DragonFire can. Check out additional products at your local authorized

DragonFire dealer or on our website

DFR-5TMWM is designed for mounting the Warn Vantage 3000 and similar sized winches.

•

Read and understand these instructions before installing product

•

Follow instructions with winch for best practices

•

Do not use product if there is any sign of damage

Off road activities can be hazardous and could lead to injury, dismemberment, paralysis and death. No warranty

of representation is made as to the products ability to protect the user from any injury or death. The user

assumes that risk. The acceptance and /or use of this merchandise purchased from DragonFire by the

customer hereby shall release DragonFire from any and all liability pertaining to the use of such merchandise.

Step 1:

Place vehicle on a flat and level surface. Place gear

selector in park and remove keys from the ignition

Step 2:

Remove grill plate from DragonFire RacePace front

bumper, retaining the nuts for reuse. (Figure A)

Step 3:

Remove the mounting hardware and take factory front

bumper off of vehicle per RacePace front bumper instructions.

Retain the factory bolts on the upper mount. If removing a

DragonFire RacePace bumper, also retain the nuts and washers

on the lower mounts.

Door Panel & Slammer Kit for XP1K

Can-Am Maverick Winch Mount Kit

Part # DFR-5TMWM-B

http://www.DragonFireRacing.com

This product requires the use of the DragonFire RacePace Front Bumper.

Can-Am Maverick

Disclaimer

Dragonfire Racing

Black

Tools Required

3/16 Allen Wrench

8mm Allen Wrench

Ratchet & 6" extension

1/2" Socket & Wrench

9/16" Socket & Wrench

13mm Socket & Wrench

10mm Socket

17mm Wrench