Dragonfly DFM-TAB-120 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Projektionsfläche Dragonfly DFM-TAB-120 herunter. Dragonfly DFM-TAB-120 8 Seiten. Dfm-tab screens
Auch für Dragonfly DFM-TAB-120: Installationshandbuch (17 seiten)

Seite drucken

EXTERNAL CONTROL FUNCTION

This motorized screen has 4 types on control options:

infrared (IR) remote control, manual control,

triggered control, and a wall switch.

To access the external control interface, press down and

open the the end cap door. Close door when finished.

Manual Control Switch

The Manual control button is located on the bottom of the Screen Casing.

• To lower screen, press button

• To raise screen, press button

• To stop screen while in motion, press button

Infrared (IR) Remote Control

1. When nothing blocks the sight of the IR window, you can use

the remote control to control the screen with built-in IR receiver.

2. For hidden installations or if the IR window is blocked, use the

external IR receiver. Plug it in to the external IR input and then

fix it at a position where the IR signal is available.

External Wall Switch (optional)

1. For external manual control of the screen, plug the RJ11 plug of the wall switch

into the external connection of screen.

Note: If a longer application is needed, the wire can be spliced with Cat5e cable.

12V Trigger Control (optional)

1. Insert 2.5mm male plug into the trigger jack at the left side of the

screen's end cap TRIG, and insert 3.5mm male plug into 12V output

hole of device (i.e. projector, receiver).

2. When the 12V source is turned "ON," the screen will lower

automatically. When the 12V source is turned "OFF," the screen

will raise automatically.

MOTOR ADJUSTMENTS

To avoid overheating the motor, do not continually retract and lower the screen

for over 4 minutes at a time. If the motor overheats, it will need a cool down time

of 2 minutes. The motor does not need any lubricants. The drop and retract limit

of the screen is factory preset to optimal configuration. Please ask your local dealer

or professional to adjust settings to avoid damaging the motor.

12V Trigger Input

External IR Input

Wall Switch In

Manual Control Switch

IR Window

Motor

Adjusting

Slot

External IR Receiver