AirStage ARXB14GALH Installationshandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Installationshandbuch für Klimagerät AirStage ARXB14GALH herunter. AirStage ARXB14GALH 19 Seiten. Indoor unit (duct type)

Seite drucken

• Hang the unit.

Pass the hanging bolts through the hangers (4 places).

Tapping screw

(Accessories)

Hanger bolt

Special nut A

(Accessories)

Special nut B

(Accessories)

Leave a space of 100 mm or more between the inlet port and the ceiling.

Fasten the unit securely with Special units A and B.

3.3A.5. LEVELING

Base horizontal direction leveling on top of the unit.

Left drain port

If using the right drain port

Good

If using the left drain port

Prohibited

En-5

Hanger (Accessories)

Unit

CAUTION

Ceiling

Level

Right drain port

Prohibited

Good

Air

Good

3.3B. Installation the unit (Floor standing

concealed type)

To prevent people from touching the parts inside the unit, be sure to install grilles on

the inlet and outlet ports. The grilles must be designed in such a way that cannot be

removed without tools.

When connecting the duct to the outlet port of the indoor unit, be sure to insulate the

outlet port and the installation screws to prevent water from leaking around the port.

Set the static pressure outside the unit to 50 Pa or less (the allowable range is between

0 and 50 Pa).

3.3B.1. INSTALL THE FILTERS

• Remove the 4 tapping screws, and then remove cover.

• Install the cover with the 4 tapping screws as shown in the illustration below.

Tapping screw

Cover

• Install the ﬁ lters (Accessories) to the unit.

AR07/09: 2 ﬁ lters

AR12/14/18: 3 ﬁ lters

Unit

Level

Prohibited

CAUTION

Filter