Bosch FAP-OC 500Series Informationen zum Produkt - Seite 13

Product Information 500 Series LSN Fire Detectors (EU)

In the case of the optical FAP−O 500 detector, the sensitivity of the optical sensors can

be set on three levels. Depending on the operating location, the optical sensor of the

detector is thus adjusted to the environmental conditions. For fire detection, also the

time behavior of the fire characteristics is evaluated. This is very different from the time

behavior of the disturbance variables.

FAP−O 500(−P)

Operating location and recommended setting for optical

detector (FAP−O 500) selectable via the programming

detector (FAP O 500) selectable via the programming

software

Office (smokers) / waiting room / restaurant / conference room

Conference room / waiting room / exhibition hall

Warehouse with vehicle traffic

Production facilities

Office (daily operation)

School / kindergarten

Theaters / concert halls

Office (no traffic)

Computer room

High−board warehouse without vehicle traffic with internal com-

bustion engines

For execution of the function test for the FAP−O 500 and FAP−

OC 500 detector, the detector must be switched to test mode. This

can be carried out via the fire panel or via the reed switch at the de-

tector with the help of a magnet.

Page 13

PI − 34.70 en

Sensitivity

O unit

low

medium

high

BDL−F.01U.025.876

A5.en/ 02.02.2006

ST−FIR/PRM1 / zab