Bosch FAP-OC 500Series Informationen zum Produkt - Seite 7

Product Information 500 Series LSN Fire Detectors (EU)

1.1. System Description

All detectors in the 500 series are equipped with two optical sensors and a pollution

sensor. The FAP−OC 500 multisensor detector contains a gas sensor as an additional

detection channel.

The response sensitivity of the detector can be programmed with the programming

software via the LSN network. All sensor signals are analyzed continually by the inter-

nal signal evaluation processor and are linked with each other.

By linking the optical sensors and the gas sensor, the OC detector can also be used

in places where the work carried out gives rise to small amounts of smoke, steam or

dust. The alarm will only be triggered automatically if the signal combination corre-

sponds with the characteristic diagram of the installation location that was selected

during configuring.

Fig. 1.: Detector front panel with sensors

Fig. 2.: Side view of detector cover

1 = Optical sensor

2 = Receiver (photo diodes)

3 = Transmitter (LEDs)

4 = CO sensor

5 = Two−color LED:

red = alarm

green = test mode / trouble

6 = Pollution sensor

7 = Measuring area

Page 7

PI − 34.70 en

Î Î Î

BDL−F.01U.025.876

A5.en/ 02.02.2006

ST−FIR/PRM1 / zab