Draper Cinefold Montageanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Montageanleitung für Projektionsfläche Draper Cinefold herunter. Draper Cinefold 2 Seiten. Cinefold portable projection screen
Auch für Draper Cinefold: Spezifikationen (1 seiten), Montageanleitung (2 seiten)

Seite drucken

Truss-Style Cinefold Portable Projection Screen by Draper

➀ Read instructions through completely before proceeding; retain for

future reference.

➁ Handle viewing surface with care; do not allow it to come in contact with

sharp or dirty objects.

➂ Use Handy Cranks provided; failure to do so may lead to screen dam-

age.

➃ Make sure screen is level.

➄ Do not write on viewing surface.

Truss Assembly

➀ Remove pouch containing viewing surface from case and set aside.

Remove all aluminum assemblies.

➁ Unfold all folded aluminum assemblies completely, noting labels and

color-coded marks. Lock all hinges. Position Stage Right and Stage Left

sections in appropriate positions with snaps facing up. Top and Bottom

sections should be set with snaps facing down.

➂ To increase frame rigidity, hinges on top and bottom frame sections have

rivnuts marked with red and green. Insert a Handy Crank through the

threadless rivnut (red) and tighten into the threaded rivnut (green).

➃ Apply small sections marked "Stiffener Bars" to back of Bottom frame

section, using eight Handy Cranks each. Failure to use all Handy Cranks

may result in damage to screen frame. Turn Bottom frame section over so

snaps face up.

➄ If your screen frame is less than 25' wide, repeat step 4 for Top frame sec-

tion. Frames 25' wide and over are equipped with a special full-width Stiff-

ener for the top frame section. To attach it, place Stiffener ﬂ at with green

rivnuts face down. Place top frame section on top of and at right angles

to Stiffener, over the green rivnuts. Insert and tighten standard Handy

Cranks. Install 45° angle braces to the Top frame section and Stiffener with

Caution: Make sure all hinges and joints are locked

before raising screen to standing position.

Anti-Sway

Stabilizers

Heavy-Duty

Legs

Form Cinefold_Inst08

Assembly Instructions

Caution

Rigid

Truss

Frame

Caution: Make

sure screen is

placed on level

surface.

Frame & Legs

Assemble with

Handy Cranks

Printed in U.S.A.

short Handy Cranks. Turn Top frame so snaps face up.

➅ Join Top and Bottom to Stage Right and Stage Left, using two Handy

Cranks on each of the four corners. Match numbers on white labels, and

keep in mind that no Handy Crank should protrude outside screen frame.

➆ Remove surface from pouch. With the row of male snaps at bottom, posi-

tion screen surface over frame. Snap each of the four corners, then snap

across bottom, up sides, and across top.

➇ Attach feet to inner side of legs with Handy Cranks, matching color-coded

markings. Attach legs to Stage Right and Stage Left with Handy Cranks,

matching colored tapes.

➈ Raise screen to a vertical position. Add Heavy-Duty Legs and Anti-Sway

Stabilizers with Handy Cranks in the positions indicated below.

Handy Crank

Caution: Beware of

pinch points.

Drapery

Bar

Adjustable Skirt Bar

Dress-Up Kit Assembly

PLEASE NOTE: All components are labeled and color coded to

facilitate assembly.

A. Valance Bar attaches to frame with simple bayonet-style mounting.

B. Draper Bars mount to Valance Bar, bayonet-style.

C. Optional adjustable Skirt Bar is secured to frame at desired level with

positive-locking plunger mechanism. If Skirt Bar is not used, Skirt may

be snapped to bottom of viewing surface.

D. Valance, Drapes, and Skirt snap onto Mounting Bars.

Valance Bar

Drapery

Bar