Draper Silhouette E Series Installations- und Betriebsanleitung - Seite 5
Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Projektionsfläche Draper Silhouette E Series herunter. Draper Silhouette E Series 5 Seiten. Electric projection screen
Auch für Draper Silhouette E Series: Installations- und Betriebsanleitung (4 seiten)
Seite drucken
Silhouette/Series E & V by Draper
See separate Serial
Communication-RS232
Instruction sheet for
enabling RS232 with
the MC1.
External Low Voltage & Wireless Control
White or Blue-Common to screen & 110/220V AC Neutral
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 110/220V AC-Hot
Black-to 110/220V AC-Hot
Green/Yellow (Ground)
Eye Port for IR Eye, RF Receiver or LED
Wall Switch. For more than one of
these, a splitter is required.
3 Button Wall Switch
DOWN - Black
COM - White
UP - Red
Aux Port for connecting additional LVC-III
modules (up to six total can be linked-
connect from Aux to Eye).
External Two-Way Serial Communication (RS232) with MC1
Program LED
Fuse
MC1
Wiring Diagrams for Optional, Built-in Video Interface Control
Built-in Video Interface Control
115 VAC supply
Trigger signal
VIC115 (115 VAC, white cord & plug)
VIC12 (12 VDC, brown & orange leads)
Built-in Low Voltage Control
Junction box at
left end of screen
N
110v AC supply
L1
Dashed wiring
by electrician
www.draperinc.com
Dashed wiring by electrician
Low voltage wiring by others
White-Common to screen & 110-120V AC Neutral
Red-to Screen (directional)
Brown-to Screen (directional)
Black-Hot to 110-120V AC
Green/Yellow-Ground
Low Voltage Wiring by others
AC Wiring by electrician
RS232 Data FROM Control System
RS232 Data TO Control System
Signal Ground & Manual Switch Common
Manual Switch Down
Manual Switch Up
Eye Port for IR Eye. For RF Receiver or LED
Wall Switch, a Splitter and a Power Supply
is required. Plug RF Receiver or LED Wall
Switch and Power Supply into splitter, then
run cable from Splitter to MC1 Eye Port.
Junction box at
left end of screen
Internal screen wiring
N
L1
Dashed wiring by electrician
Internal screen wiring
White (Neutral)
Black (Hot)
Green (Ground)
(765) 987-7999
Internal Screen Wiring
White/Blue (Common)
Red 110/Black 220 (Up)
Black 110/Brown 220 (Down)
Green/Yellow
(Motor Ground)
To
110/220V
Line
STOP
Location of key
operated on-off
switch if furnished
STOP
Control
Switches
24v DC
Internal Screen Wiring
White (Common)
Red (Up)
Black (Down)
Green/Yellow (Gnd)
To
110-120V
Line
STOP
Location of key
operated on-off
switch if furnished
STOP
Control
Switches
24v DC
White (Neutral)
Black (Hot)
Green (Ground)
Page 5 of 5