Draper SLX17 Broschüre & Specs - Seite 5
Blättern Sie online oder laden Sie pdf Broschüre & Specs für Projektionsfläche Draper SLX17 herunter. Draper SLX17 16 Seiten. 230v ac scissor lift slx video projector lift
Auch für Draper SLX17: Installations- und Betriebshandbuch (7 seiten), Installations- und Betriebsanleitung (7 seiten), Anweisungen für Installation und Betrieb (8 seiten), Installations- und Betriebsanleitung (7 seiten)
Seite drucken
Micro Projector Lift
Designed for today's smaller projectors.
The Micro Projector Lift (MPL) is small and convenient, just like the
projectors it is designed to accommodate. Weighing only 35 pounds, it can
be installed in an existing ceiling opening without disturbing the
ceiling framework. The projector's "show" position can be set at any point
with infinite adjustability, up to extension.
The Micro Projector Lift utilizes the same exclusive 3-scissor design
as Draper's popular Scissor Lift (see page 6), but features a compact
side-folding scissor. The load is lifted by two wide Kevlar
belt provides extra protection. Closed height of lifting unit is only tall
(not including projector, mounting mechanism or closure), so a minimal
amount of overhead ceiling space is required.
System Options
• Ceiling closure panel—White closure panel is optional and can also be
adapted to attach ceiling tile to match surrounding ceiling. Ceiling closure
panel option shown in photos at right.
• Plenum housing—Height varies according to choice of projector. Overall
height of plenum is adjustable. Includes ceiling trim ring. Does not
include ceiling closure panel.
• Ceiling finish kit—Ceiling closure panel and ceiling trim ring to finish
ceiling opening.
• Projector mounting bracket—The Low Profile Mount is described
below. Projector may also be mounted flush to bottom pan.
• Factory installed cables for Video and Projector Control.
• Ceiling access door—A x hinged door provides access to the
MPL above a finished
ceiling for maintenance
or repairs without having
to damage the ceiling.
Available with a white
painted finish or recessed
to accept ceiling tile.
• Controls—Includes
1 wall switch. See website for
other control options.
www.draperinc.com/go/MPL.
htm
Dimensions & Data—Micro Projector Lift
Height of lift in closed position
1
Overall lift dimensions (W x L)
Ceiling opening
Optional plenum housing (trim edge to trim edge)
Max. projector size (W x L)
3
Max. down travel
Capacity
4
Capacity with Low Profile Mount
Net weight of lift
Amperes
5
Not including projector, mount/bracket or optional closure. Optional
1
Low Profile Mount adds 4⅞ to unit height (including Universal
Projector Bracket).
Max. plenum height: 20
⁄
. Min. plenum height: 12
2
5
8
Max. available projector/bracket height (with Plenum): 13½,
3
Min. available projector/bracket height (with Plenum): 5½
Does not include allowance for closure panel. Closure panel weighs 10 lbs.
4
Does not include any load placed on MPL's pre-wired power cable.
5
®
straps. Safety
20¾"
21"
Min. 5"
Max. 53"
Varies with
projector/bracket
and room
conditions
Kevlar
5
21 x 20¾
23½ x 23½
23⅞ x 23⅞
2
20 x 20
4
35 lbs.
26 lbs.
35 lbs.
1.2
⁄
5
8
www.draperinc.com
MPL installations, both featuring optional ceiling closure.
Photography by Wayne Williams, Indianapolis, IN. U.S. Patent Nos.
D395,909 and 6,637,711. Other patents pending.
®
is a registered trademark of DuPont.
Low Profile Mount
Fixed mount for "low profile" ceiling
installations with our Universal
Projector Bracket for projectors
weighing less than pounds. Places
top of projector only ⅞ from ceiling
(*may vary slightly according to choice
of projector). Ball joint adjusts infinitely
up to ° pitch, ° roll and ° yaw. The
SMS Low Profile Mount may be used
3
3
/
"
8
in most Draper projector lifts.
765-987-7999
3
/
"
8
5
/
"
16
2
3
/
"
4
3
3
/
"
8
3 /16"
*4 7 /8"
5