Bosch WAE20464IL Series Gebrauchsanweisung und Installationsanleitung - Seite 33
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung und Installationsanleitung für Waschmaschine Bosch WAE20464IL Series herunter. Bosch WAE20464IL Series 40 Seiten.
![Bosch WAE20464IL Series Gebrauchsanweisung und Installationsanleitung](/uploads/products/server2/1364206/1364206.jpg)
Hose and cable lengths
Left-hand connection
■
Right-hand connection
■
Tip:
The following are available from
specialist dealers/the after-sales
service:
Extension for Aqua-Stop and cold
■
water supply hose (approx. 2.50 m).
Order no. WMZ2380, WZ10130,
Z7070X0
A longer supply hose (approx. 2.20
■
m) for standard model
Positioning and connecting
Water inlet
:
Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Do not immerse the Aqua-Stop safety
valve in water (it contains an electric
valve).
Observe the following when connecting
the machine:
Notes
Only operate the washing machine
■
using cold mains water.
Do not connect the machine to the
■
mixer tap of an unpressurised hot-
water boiler.
Do not use a used supply hose. Only
■
use the supply hose supplied or one
that was purchased from an
authorised specialist retailer.
Do not bend, squash, modify or cut
■
through the water supply hose
(otherwise its strength is no longer
guaranteed).
Only tighten the screw connections
■
by hand. If the screw connections
are tightened too much with a tool
(pliers), the thread may be
damaged.
Optimum water pressure in the supply
network
At least 100 kPa (1 bar)
Maximum 1000 kPa (10 bar)
When the tap is open, the water flow is
at least 8 l/min.
If the water pressure is higher than this,
a pressure-reducing valve must be
installed.
Connection
Connect the water supply hose to the
water tap (¾" = 26.4 mm) and to the
appliance (not necessary for Aqua-Stop
models as this is permanently installed):
en
33