Draper Targa XL Anleitung Installation & Betrieb - Seite 8
Blättern Sie online oder laden Sie pdf Anleitung Installation & Betrieb für Projektionsfläche Draper Targa XL herunter. Draper Targa XL 8 Seiten. Electric projection screen 220v
Seite drucken
Premier XL / Targa XL 220V
Section 9 - Accessing Internal Low-Voltage Control Unit
PLEASE NOTE: Applies ONLY if Unit is built into case.
1.. Locate LVC-IV Unit.
Hole*
2. Remove the two
star head screws from the motor
(2)
end of the screen housing.
3. Remove the access panel with the LVC-IV from the
screen housing.
Remove two (2)
Hex head screws
from endcap.
(LVC-IV)
Remove
access panel
with LVC-IV.
*A second electrical connection hole
is included in the screen housing
in order to separate Low-Voltage
and High-Voltage Wiring.
page 8 of 8
Electrical
Connection
Hole*