Bosch WAG14060IN Betriebs- und Installationsanleitung - Seite 31

Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Waschmaschine Bosch WAG14060IN herunter. Bosch WAG14060IN 43 Seiten.

Bosch WAG14060IN Betriebs- und Installationsanleitung
Fault
The washing has not been spun
correctly.
Spin result unsatisfactory.
Spin cycle actuated several times. Not a fault.
The programme takes longer than
usual.
Washing result not satisfactory.
Detergent residue on the washing. Some phosphate-free detergents
Grey residue on the washing.
31
Cause
Large laundry items have become
entangled and are not evenly
distributed in the drum.
For safety reasons, the high-speed
final spin cycle was automatically
cancelled.
O
The Rinse
or Spin Í programme selected maximum spin speed:
see page 18.
Unbalanced load detection system is attempting to compensate the
imbalance by spinning the washing several times.
Not a fault.
Imbalance compensation system is
attempts to balance the laundry by
repeated distribution.
The foam detection feature has
activated an additional rinsing cycle
to reduce the amount of foam.
Soiling is greater than expected or
recommended load has been
exceeded.
Detergent was underdosed.
contain water-insoluble residue
which may appear as light stains on
the washing.
Soiling caused by ointment, grease
or oil.
If the fault recurs, call customer service, see page 33.
Remedial action
Always load large and small items
together into the drum.(see also
imbalance compensation system).
Wash large and small items
together in order to reduce the
imbalance.
Adjust the detergent dosage for the
next wash cycle.
Select suitable programme and
press the Intensive È button or
reduce load.
Dose detergent according to the
manufacturer's instructions.
O
Select Rinse
immediately
or
brush out the washing after drying.
Select maximum detergent dosage
and maximum permitted
temperature for the next wash
cycle.