Draper 15225 Anleitung Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Elektrowerkzeug Draper 15225 herunter. Draper 15225 16 Seiten. 2000w 230v hot air gun
Auch für Draper 15225: Benutzerhandbuch (16 seiten)

Seite drucken
Draper 15225 Anleitung Handbuch
5.
HEALTH & SAFETY INFORMATION

5.2 ADDITIONAL SAFETY RULES FOR HOT AIR GUNS

NOTE: A FIRE COULD ARISE IF THIS HOT AIR GUN IS NOT USED WITH CARE.
1.
Ensure that the hot air gun is switched OFF before connecting to the power supply.
2.
Do not use this hot air gun as a hair dryer.
3.
Do not touch the hot metal nozzle.
4.
Allow the hot air gun to cool down completely before storing.
5.
Do not direct the flow of hot air at persons or animals.
6.
Do not hold the metal nozzle too close to the work piece as the air flow will be restricted
and may cause the hot air gun to overheat. Position the nozzle at least 25mm from the
work surface.
7.
Use in a well ventilated area as poisonous or inflammable fumes or gases may be
produced from certain plastics, paints or similar materials.
8.
When working with or near easily combustible materials and inflammable gases, take
special care. (Do not apply heat to any one area for long periods of time).
9.
Heat may be conducted to combustible materials which are not visible from the
work area.
10. Never leave the hot air gun running whilst unattended.
11. Do not look directly into the metal nozzle when the machine is switched on.
12. Place the hot air gun in its free standing position (page 10) after use and allow it to cool
down before storing it away.
5.3

CONNECTION TO THE POWER SUPPLY

Make sure the power supply information on the machine's rating plate are compatible with
the power supply you intend to connect it to.
This product comes supplied with a UK standard 3 pin plug fitted. It is designed for
connection to a domestic power supply rated at 230V AC.
This appliance is Class II† and is designed for connection to a power supply matching that
detailed on the rating label and compatible with the plug fitted.
If an extension lead is required, use an approved and compatible lead rated for this
appliance. Follow all the instruction supplied with the extension lead.
†Double insulated
is applied to the basic insulation to protect against electric shock in the event of failure of
the basic insulation.
Apart from replacing the fuse in the plug, no other electrical work is recommended on this
hot air gun.
: This product requires no earth connection as supplementary insulation
7