Draper 58329 Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Elektrowerkzeug Draper 58329 herunter. Draper 58329 16 Seiten.
Seite drucken
4.
INTRODUCTION
4.1 SCOPE
Ideal for paint stripping, thawing pipes and other DIY applications.
This product is intended for domestic and infrequent light trade use only. Any application other
than that it was intended for, is considered misuse.
4.2 SPECIFICATION
Stock No. .................................................................................................................................. 58329
Part No. ............................................................................................................................ HG1800SF
Rated voltage ................................................................................................................ 230V~50Hz
Rated input ............................................................................................................................ 1800W
Temperature (approx.)
Setting 1 ......................................................................................................................... 400°C
Setting 2 ......................................................................................................................... 600°C
Air flow volume
Setting 1 .................................................................................................................... 250L/min
Setting 2 .................................................................................................................... 500L/min
Weight (machine only):........................................................................................................... 0.75kg
4.3 HANDLING AND STORAGE
– Care must be taken when handling this product.
● Dropping this power tool could have an effect on its accuracy and could also result in
personal injury. This product is not a toy and must be respected.
– Environmental conditions can have a detrimental effect on this product if neglected.
● Exposure to damp air can gradually corrode components.
● If the product is unprotected from dust and debris, components will become clogged.
● If not cleaned and maintained correctly or regularly, the machine will not perform at its best.
- 5 -