Draper 83646 Anleitung Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Elektrowerkzeug Draper 83646 herunter. Draper 83646 16 Seiten. 2000w 230v hot air gun

BASIC HOT AIR GUN OPERATIONS

8.3 PAINT REMOVAL FROM WINDOW

FRAMES - FIG.3

IMPORTANT: Do not direct the hot air gun at the glass

during use as it may crack. Always use the glass

protection nozzle

hot nozzle.

8.4 HEATING AND SHAPING PLASTIC

TUBING - FIG.4

Fit the reflector hook nozzle

on to the low heat setting and, carefully heat the

tubing evenly moving it from side to side.

8.5 DEFROSTING WATER PIPES - FIG.5

IMPORTANT: Do not defrost plastic tubing/piping.

Fit the reflector hook nozzle

on to one of the higher heat settings and, gently heat

the frozen area of the pipe starting from the edge of

the area and moving in towards the centre.

IMPORTANT: Take care not to heat the pipe too quickly

as this could cause the pipe to crack and burst. Do not

overheat water pipe joints as these are only soldered

together (max. 200ºC).

. Do not touch the glass with the

. Switch the hot air gun

FIG.3

FIG.5

FIG.4