Draper CIW12VD Original-Bedienungsanleitung - Seite 14
Blättern Sie online oder laden Sie pdf Original-Bedienungsanleitung für Elektrowerkzeug Draper CIW12VD herunter. Draper CIW12VD 20 Seiten.
Seite drucken
8.
BASIC IMPACT WRENCH OPERATIONS
8.3 VARIABLE SPEED TRIGGER –
FIG. 3
When the variable speed trigger switch (3) is
depressed, the drive will rotate (provided the
forward/reverse selector (6) is set in the forward or
reverse position). This trigger switch is electronic
which enables the user to vary the speed
continuously.
–
The speed varies according to how far the
trigger switch is depressed.
–
The further it is depressed, the faster the
drive spindle will rotate.
–
The lighter it is depressed, the slower it
will rotate.
Note: If the fastening is heavily corroded,
or extremely tight, it may be necessary to
release the fixing by hand before continuing
with the wrench.
Note: Always tighten fixings to the correct torque
as indicated by the manufacturer using a
calibrated torque wrench. Failure to do so may
result in the fixing becoming damaged or
insufficiently tightened.
Note: This product is equipped with an
electric brake.
8.4 BATTERY PACK CHARGE STATUS
– FIG. 3
The amount of charge remaining in the battery
pack is indicated by the battery charge indicator
(7) located just above the handle section.
–
The display is made up of three lights that
illuminate every time the ON/OFF trigger is
depressed.
–
The level of charge remaining determines how
many of the lights will illuminate – 1, being
minimal low power, to all 3 indicating full
charge.
8.5 LED WORKLIGHT – FIG. 4
To aid use in confined, and inadequately lit spaces;
the LED worklight (2) automatically illuminates
when the trigger is activated.
(3)
FIG. 3
(2)
FIG. 4
– 14 –
(7)
(6)