Bosch WAK20200EG Gebrauchsanweisung und Installationsanleitung - Seite 15
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung und Installationsanleitung für Waschmaschine Bosch WAK20200EG herunter. Bosch WAK20200EG 38 Seiten.
Seite drucken
0
Programme default
settings
T he temperature, spin speed and
P r o g r a m m e d e f a u l t s e t t i n g s
programme duration ("Ready in" time)
for all programmes are preset at the
factory.
These are displayed in the display panel
after selecting the programme.
You can change the default settings as
follows.
Temperature (Temp °C)
Depending on the programme progress,
you can change the preset temperature (in
°C) before and during the programme.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
The maximum temperature that can be set
depends on the programme which has
been selected.
Overview of programmes
Spin speed (rpm 0)
Depending on the programme
progress, you can change the spin
speed (in rpm; rotations per minute)
before and during the programme.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
Setting – – – 0 : Rinse hold = without
final spin, the laundry remains in the
water after the final rinse.
You can select "Rinse hold" to prevent
creasing if the laundry will not be taken
out of the washing machine immediately
after the programme has ended.
The maximum speed that can be set
depends on the model and programme
that have been selected.
Overview of programmes ~ Page 12
~ Page 12
Programme default settings
Ready in time (Ready in)
When you select the programme, the
relevant programme duration is displayed.
The programme duration is automatically
adjusted when the programme is running.
Changes to the programme default
settings or programme settings also
change the programme duration.
Before starting the programme, the
programme end ("Ready in" time) can be
preselected in increments of one hour (h =
hours) up to a maximum of 24 hours.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
The programme duration is
Note:
included in the selected "Ready in" time.
After the start, the preselected time e.g.
8 h is displayed and the time counts
down to the start of the wash
programme. The programme duration is
then displayed, e.g. 2:30
(hours:minutes).
Changing the preselected time:
You can change the preselected time
after the start of the programme as
follows:
Press Start/Reload A
1.
Press the "Ready in" button
2.
repeatedly until the required number
of hours is displayed.
Press the Start/Reload A button.
3.
Adding laundry while the preselected
time continues running:
Press Start/Reload A
1.
The symbols YES and ¼ light up on
2.
the display panel. The washing
machine door can be opened and
laundry can be added.
Close the washing machine door.
3.
Press the Start/Reload A button.
4.
The preselected time continues to
run.
en
15