Draper HG2000D Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Elektrowerkzeug Draper HG2000D herunter. Draper HG2000D 16 Seiten.
Seite drucken
9.
4.
INTRODUCTION
MAINTENANCE AND TROUBLESHOOTING
9.1 MAINTENANCE
4.1 SCOPE
Regular inspection and cleaning reduces the necessity for maintenance operations and will keep your
As part of our core range, this product is suitable for enthusiasts and tradespeople alike.
tool in good working condition.
Any application other than that it was intended for, is considered misuse.
The motor must be correctly ventilated during tool operation. Avoid blocking the air inlets and vacuum
4.2 SPECIFICATION
the ventilation slots regularly.
Stock No. .......................................................................................................................................15225
9.2 TROUBLESHOOTING
Part No. ...................................................................................................................................HG2000D
Rated voltage ..................................................................................................................... 230V~50Hz
Problem
Rated input ................................................................................................................................ 2000W
Motor does not start.
Temperature (approx.)
Setting 1 ...................................................................................................................................50°C
Setting 2 .................................................................................................................................450°C
Setting 3 .................................................................................................................................600°C
Air flow volume
Setting 1 ............................................................................................................................500L/min
Setting 2 ............................................................................................................................250L/min
Setting 3 ............................................................................................................................500L/min
Weight (machine only):................................................................................................................ 0.85kg
4.3 HANDLING & STORAGE
– Care must be taken when handling this product.
● Dropping this power tool could have an effect on its accuracy and could also result in
personal injury. This product is not a toy and must be respected.
– Environmental conditions can have a detrimental effect on this product if neglected.
● Exposure to damp air can gradually corrode components.
● If the product is unprotected from dust and debris, components will become clogged.
● If not cleaned and maintained correctly or regularly, the machine will not perform at its best.
IMPORTANT: Please note this machine is fitted with a safety thermal overload protection. If the
product is used continuously too close to the work piece (i.e. misused) resulting in over heating
and the machine potentially catching fire, the thermal overload protection will be activated and
stop the heating element from operating within the machine. This will cause the gun to blow cool
air until the inner components of the heat gun have cooled sufficiently. This process takes
10. OPTIONAL ACCESSORIES
approximately 2 minutes. Repeat overloading will lead to permanent damage.
Remember the nozzle will remain hot for sometime - a safe storage location should be
10.1 OPTIONAL ACCESSORIES
used.
Store in a dry location out of the reach of children.
A full range of accessories are available from Draper Tools.
Please visit our website for details: www.drapertools.com
Possible Cause
1. Blown fuse in plug.
2. Unknown.
- 13 -
- 5 -
Remedy
1. Replace fuse.
2. Return to service centre.