Draper CD182V2B Anleitung Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Bohrer Draper CD182V2B herunter. Draper CD182V2B 20 Seiten. 18v cordless rotary drill

Seite drucken
Draper CD182V2B Anleitung Handbuch
5.
HEALTH & SAFETY INFORMATION
5.4 INSTRUCTIONS FOR DRILLS,
CHARGERS AND BATTERIES.
1)
Drills and Impact Drills
a)
Wear ear protectors with impact drills.
Exposure to noise can cause hearing loss.
2)
Battery Chargers
a)
Before charging, read the instructions.
b)
For indoor use. Do not expose to rain.
c)
Do not charge non-rechargeable batteries.
d)
The battery charger is only suitable for charging
rechargeable Draper 18V Ni-MH batteries.
Any other application is considered misuse.
3)
Battery
a)
The battery must be removed from the appliance
before it is scrapped.
b)
The appliance must be disconnected from the
supply mains when removing the battery.
c)
The battery is to be disposed of safely.
d)
Do not use non-rechargeable batteries.
e)
Do not crush, open or burn the battery. Exposure
to potentially harmful materials may occur.

5.5 CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.

Caution: Risk of electric shock. Do not open.
This appliance is supplied with a moulded 3 pin mains plug for your safety. The value of the fuse
fitted is marked on the pin face of the plug. Should the fuse need replacing, ensure the substitute
is of the correct rating, approved to BS1362 and ASTA or BS Kite marked.
ASTA
BSI
The fuse cover is removable with a small plain slot screwdriver. Ensure the fuse cover is replaced
before attempting to connect the plug to an electrical outlet. If the cover is missing, a replacement
must be obtained or the plug replaced with a suitable type.
If a replacement plug is to be fitted this must be carried out by a qualified electrician.
The damaged or incomplete plug, when cut from the cable should be disabled to prevent
connection to a live electrical outlet.
This appliance is Class II
on the rating label and compatible with the plug fitted.
If an extension lead is required, use an approved and compatible lead rated for this appliance.
Follow all the instruction supplied with the extension lead.
†
Double insulated
applied to the basic insulation to protect against electric shock in the event of failure of the basic
insulation.
Important: On products exceeding 2000W it is recommended that the power cable and/or
extension cable are fully unwound before a connection is made to the power supply. However,
ensure the residual cable does not pose a trip hazard
8
†
and is designed for connection to a power supply matching that detailed
: This product requires no earth connection as supplementary insulation is
f)
In case of fire use CO2 dry chemical extinguisher.
g)
Do not expose to high temperatures >50°C. Cells
may degrade at high temperatures.
h)
The battery must be charged by a constant
current, constant voltage transformer.
i)
Charge battery regularly in conditions between
5°C to 45°C with the specified charger designed
for this battery.
j)
Store in a dry, well ventilated area within the
recommended limits of 10°C to 30°C.
k)
Do not use battery if it has been stored at 5°C or
less. Allow it to "normalise" at room temperature
before usage/changing.
l)
During decommissioning remove the battery cell
for recycling separately to the product, which is
covered by the waste electrical and electronic
equipment directive. Insulate the terminals with
adhesive insulating tape to prevent a short circuit,
fire or explosion occurring.