Draper SDS+ Anleitung Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Bohrer Draper SDS+ herunter. Draper SDS+ 12 Seiten. Sds+ rotary hammer drills

CONNECTING YOUR MACHINE TO THE POWER SUPPLY: (240V)

To eliminate the possibility of an electric shock your machine has been fitted with a BS approved,

non rewireable moulded plug and cable which incorporates a fuse, the value of which is indicated

on the pin face of the plug. Should the fuse need to be replaced an

must be used of the same rating, marked thus

plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour

as that visible on the pin face of the plug (i.e. red). Fuse covers are available from your Draper Tools

stockist.

If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now

be suitably prepared and the correct type of plug fitted. See below.

*WARNING:

A plug with bare flexible wires exposed is hazardous if engaged in a live power socket outlet.

WARNING: THIS APPLIANCE IS DOUBLE INSULATED.

Blue – Neutral, Brown – Live.

As these colours may not correspond with the coloured markings identifying the terminals in your

plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter

'N' or coloured black or blue.

The wire which is coloured brown must be connected to the terminal which is marked with the

letter 'L' or coloured red or brown.

CONNECTING YOUR MACHINE TO THE POWER SUPPLY (110V)

To eliminate the possibility of an electric shock your machine has been fitted with a BS approved,

rewireable plug and cable. If the fitted plug is not suitable, it should be removed, the end of the

cable should be suitably prepared and the correct type of plug fitted. See below.

WARNING: THIS APPLIANCE IS DOUBLE INSULATED.

Single phase 110 volt machines must be connected using the relevant coding and matching the

colour of the flexible cable to that of the plug. The procedure is as follows:

1. Connect brown coloured core to plug terminal marked letter 'L' (live).

2. Connect blue colour core to plug terminal marked letter 'N' (neutral).

PHD520VC

POWER SUPPLY

. The fuse cover is detachable, never use the

PHD624VC

- 3 -

approved BS1362 fuse