Draper 52623 Anleitung Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Säge Draper 52623 herunter. Draper 52623 16 Seiten. 350mm (14") chop saw

OPERATION

1. On-off switch

To start the chop saw, depress the trigger locking

button ✮✌ and press the trigger switch ✯✌. The

saw can now be operated until the trigger is

released Fig.7.

NOTE: We suggest that when the machine is not in

use, the switch ✯✌ be locked in the off

position using a padlock ✰✌ (not supplied)

through the holes in the trigger switch as

shown in Fig.7.

2. Adjusting depth of cutting wheel

Screw the adjusting screw ✱✌ clockwise, then

secure the bolt by tightening the nut ✳✌ for

deeper cutting. For shallow cutting screw the

adjusting screw anti-clockwise. See Fig.8.

3. Using clamp device to secure workpiece

For quick adjustment, disengage quick release

lever ✴✌. The vice clamp ✶✌ can now be pushed

in or withdrawn to accommodate the workpiece.

Engage quick release lever ✴✌ then tighten

clamp using the clamping handle ✵✌. See Fig.9.

4. Angle cutting

Loosen screw ✷✌ with the hex key provided.

Then adjust fence ✹✌ to the required angle.

Tighten screw. Backstop can be adjusted

backwards and forwards to meet your

requirements. Fig.10.

Fig.7.

✮✌

✯✌

Fig.8.

✱✌

✳✌

✷✌

- 8 -

✴✌

✶✌

✹✌

✰✌

Fig 9.

✵✌

Fig.10.