Draper 02520 Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Handbuch für Schleifer Draper 02520 herunter. Draper 02520 20 Seiten. 230v router
Auch für Draper 02520: Handbuch (20 seiten)

Seite drucken

HEALTH AND SAFETY INFORMATION

5.3

SAFETY RECOMMENDATIONS FOR THE CORRECT USE OF

ABRASIVE PRODUCTS

General. Bonded abrasive products are breakable and shall therefore be handled with utmost care. The

use of damaged or improperly mounted or used abrasive products is dangerous and can cause serious

injuries.

Delivery, handling and storage. Abrasive products must be handled and transported with care.

Abrasive products must be stored in such a manner that they are not subjected to mechanical damaged

and harmful environmental influences.

Selection of the abrasive product. Information on the label or the abrasive product stating restrictions

of use, safety indications or any other instructions must be followed. In case of doubt concerning the

selection of abrasive products, the user shall request information from the manufacturer or supplier.

Visual inspection and ring test. Abrasive products must be subjected to a visual inspection as

received before mounting. In addition, a ring test shall be executed for vitrified wheels with D>80mm.

Damaged abrasive products shall be destroyed.

Mounting before starting and information for grinding. The mounting of abrasive products shall be

carried out according to the instructions provided by both the wheel and the machine manufacturer.

Mounting of abrasive products must be carried out by a qualified trained person. After initial mounting,

the wheel must be test run for a reasonable time – the specified maximum operating speed of the wheel

shall not be exceeded.

Further information. The following instructions must be observed, supplementary to the information

contained in the instruction for use of the grinding machine:

–

Observance of the user's information from the grinding machine manufacturer.

–

Safety devices shall be mounting to the machine and shall be secured.

–

No grinding operations without protection by safety devices.

–

Use of personal protective equipment according to the type of machine and type of application,

e.g. eye and face protection, ear protection, respiratory protective devices, protective footwear,

protective gloves and other protective clothing.

–

Only grinding operations for which the abrasive product is suitable shall be carried out (taking

into account restrictions of use, safety indications or other information).

–

Jamming of the hand-held grinding machine shall be prevented. In the case of cutting-off with

hand-held grinding machines, the abrasive product shall be placed in the cutting gap in a

straight position.

–

Before placing the hand-held grinding machine on the workbench or on the floor it shall be turned off

and it shall be ensured that the abrasive product has stopped.

5.4

SAFETY RECOMMENDATIONS FOR THE CORRECT USE OF

SUPERABRASIVES

General. Superabrasives are breakable and shall therefore be handled with utmost care! The use of

damaged or improperly mounted or used superabrasives is dangerous and can cause serious injuries.

Delivery, handling and storage. Superabrasives shall be handled and transported with care.

Superabrasives shall be stored in such a manner that they are not subjected to mechanical damages

and harmful environmental influences.

Selection of superabrasives. Information on the label or the superabrasive as well as restrictions of

use, safety indications or any other instruction shall be followed. In case of doubt concerning the

selection of superabrasives, the user shall request information from the manufacturer or supplier.

Visual inspection and ring test. Superabrasives shall be subjected to a visual inspection as received

before mounting. In a addition, a ring test shall be executed for superabrasives with vitrified core and

abrasive section and D>80mm. Damaged superabrasives shall not be used.

Mounting, before starting and information for grinding. The mounting of superabrasive shall be

carried out according to the instructions provided by both, the superabrasive and the machine

manufacturer. Special attention shall be drawn to the fact that mounting of superabrasives is to be

– 9 –