Draper 70300 Benutzerhandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schleifer Draper 70300 herunter. Draper 70300 20 Seiten. Angle grinder/cut-off tool
Seite drucken
Further information. The following instructions shall be observed, supplementary to the
information of the grinding machine:
–
Observance of the user's information of grinding machine manufacturer.
–
Before starting, safety devices shall be mounted to the machine.
–
No grinding operations without protection by safety devices.
–
Use of personal protective equipment according to the type of machine and type of
application, e.g. eye and face protection, ear protection, respiratory protection devices,
protective footwear, protective gloves and other protective clothing.
–
Only grinding operations for which the superabrasive is suitable shall be carried out (taking
into account restrictions of use, safety indications or other information).
–
In the case of cutting-off with hand-held grinding machines, the superabrasive shall be placed
in the cutting gap in a straight position. Jamming of the hand-held grinding machine shall be
prevented.
–
Before placing the hand-held grinding machine on the workbench or on the floor it shall be
turned off and it shall be ensured that the abrasive product has stopped.
5.5 RESIDUAL RISK
Important note: Although the safety instructions and operating manuals for our tools contain
extensive instructions for safe working with power tools, every power tool involves a certain
residual risk which can not be completely excluded by safety mechanisms. Power tools must
therefore always be operated with caution!
5.6 CONNECTION TO THE POWER SUPPLY (CHARGER)
Caution: Risk of electric shock. Do not open.
This appliance is supplied with an approved plug and cable for your safety. Never use a damaged
or incomplete plug.
This appliance is Class II† and is designed for connection to a power supply matching that detailed
on the rating label and compatible with the plug fitted.
Carefully select an extension lead. Some machines are not suitable for use with extension leads.
If the tool is designed for use outdoors, only use an extension lead suitable for that environment in
conjunction with an RCD adaptor. When using an extension lead, select one capable of handling
the current (amps) drawn by the machine in use. Ensure the cable is fully unwound regardless of
the distance between the power supply and the tool. Excess current (amps) and a coiled extension
lead will cause the cable to heat up and can result in fire.
Keep extension leads away from moving hazardous parts to avoid damages to the cable which
can lead to contact with live parts. Position cable safely to avoid tripping over.
†Double insulated
applied to the basic insulation to protect against electric shock in the event of failure of the basic
insulation.
Important! If using an extension lead, follow the instructions that came with your lead regarding
maximum load while cable is wound. If in doubt, ensure that the entire cable is unwound. Using a
coiled extension lead will generate heat which could melt the lead and cause a fire.
: This product requires no earth connection as supplementary insulation is
– 11 –