Draper FlexShade Anleitung Installation & Betrieb - Seite 11

Blättern Sie online oder laden Sie pdf Anleitung Installation & Betrieb für Inneneinrichtung Draper FlexShade herunter. Draper FlexShade 16 Seiten. Exterior clutch-operated shade
Auch für Draper FlexShade: Handbuch für Installation und Betrieb (8 seiten), Einbauanleitung (2 seiten), Anleitung Handbuch (12 seiten), Anweisungen für Installation und Betrieb (11 seiten), Anleitung Installation & Betrieb (12 seiten), Anleitung Installation & Betrieb (16 seiten), Anleitung Installation & Betrieb (4 seiten), Anleitung Handbuch (7 seiten), Anleitung Installation & Betrieb (12 seiten)

Seite drucken
Draper FlexShade Anleitung Installation & Betrieb
FlexShade
®
5.
B.
Re-Insert Fabric
Retainers into
Side Channels.
Section 9 - Channel Adaptors
If opening is not suitable for direct
mounting due to uneven surfaces,
stonework, trim, or other irregular
element, use Channel Adaptors to
build in or fur out an opening for Side
Channel or headbox attachment.
1 "
(38mm)
1 1/2" Tube
1 "
(38mm)
Crank-Operated ZIP
Angled leg of
must be oriented towards back
A.
Insert Side
Channel Guide
into Side
Channels.
Side Channel Cross Section
(Optional Hardware)
Channel Adaptors can provide a
mounting surface for both the Side
Channels and headbox. If necessary,
installer can "stack" a sufficient
number of tubes to bring the opening
flush from floor to ceiling.
2"
(51mm)
L Angle
1 "
(32mm)
1 "
(38mm)
6.
into 'U' Channel
FABRIC RETAINER STRIP
and secure it with
appropriate mounting
hardware, through
FOAM
the center of Foam
CUSHION
Padding, through
'U' Channel, and
then into mounting
surface.
FOAM
CUSHION
Use and configuration of Channel Adaptors
is site dependent: Each installation may
require different adaptors or a combination of
adaptors. Installer is responsible for safely and
securely attaching Channel Adaptors to prepare
each opening for best installation of the product.
2" U Channel
1
"
(46mm)
2"
(51mm)
Place modified
Side Channel
Compress
foam padding.
Please Note: Install fasteners
no more than 24"
apart.
' U '
C H A
N N E
L
L
W A L
L
W A L
1 "
(29mm)
1 3/4" Fur Out
"
(19mm)
1 "
(41mm)
page 11 of 16
Side
Channel
Side Channel
Mounting Hardware
(by others)
(610mm)
L
W A L
L
W A L
1 "
(29mm)
3/4" Fur Out
1 "
(41mm)