Draper FlexShade Slim NEXD Anweisungen für Installation und Betrieb - Seite 4
Blättern Sie online oder laden Sie pdf Anweisungen für Installation und Betrieb für Inneneinrichtung Draper FlexShade Slim NEXD herunter. Draper FlexShade Slim NEXD 7 Seiten.
Seite drucken
Clutch-Operated FlexShade
Slim Hardware
Section 3 - NEXD Cassette Installation
Ceiling Mount
(Fig. 5-A)
Caution: Before mounting shades, verify measurements on label provided with shade, and ensure unit is installed at correct width.
Please Note: Endcaps covers are NOT to be removed at any point during NEXD Cassette installation.
1. The brackets will be attached to top of window frame
as shown.
(or ceiling)
Please note: Mounting brackets must be securely attached
to mounting surface.
2. The outermost brackets should be installed approximately
2"
in from edge of window frame. Any remaining
(51mm)
brackets will be spaced out evenly in between outermost
brackets.
3. Before tightening bracket to mounting surface, make sure
that plastic tab on bracket is facing toward front of shade.
4. To remove cassette from brackets, reverse steps 1 - 3.
Wall Mount
(Fig. 5-B)
Caution: Before mounting shades, verify measurements on label provided with shade, and ensure unit is installed at correct width.
Please Note: Endcaps covers are NOT to be removed at any point during NEXD Cassette installation.
1. The brackets will be attached to wall above window frame
as shown.
Please note: Mounting brackets must be securely attached
to mounting surface.
2. The outermost brackets should be installed approximately
2"
in from edge of window frame. Any remaining
(51mm)
brackets will be spaced out evenly in between outermost
brackets.
3. Before tightening bracket to mounting surface, make sure
that plastic tab on bracket is facing toward front of shade.
4. To remove cassette from brackets, reverse steps 1 - 3.
NEXD,
®
Figure 5-A
CEILING MOUNTING
1. Attach mounting
brackets to ceiling.
1. Attach mounting
brackets to ceiling.
J A M
WINDOW
1. Attach mounting
J A M
brackets to wall.
WINDOW
Figure 5-B
WALL MOUNTING
1. Attach mounting
brackets to wall.
B
J A M
WINDOW
B
J A M
WINDOW
2. Insert rail along top of
BRACKET
ATTACHED
TO CEILING
SNAP
2. Insert rail along top of
BRACKET
ATTACHED
TO CEILING
SNAP
3. Rotate shade until
bottom side of rail snaps
B
onto mounting bracket.
2. Insert rail along back
3. Rotate shade until
of shade onto top side
bottom side of rail snaps
B
of mounting brackets.
onto mounting bracket.
2. Insert rail along back
of shade onto top side
of mounting brackets.
3. Rotate shade until
bottom side of rail
snaps onto mounting
bracket.
3. Rotate shade until
bottom side of rail
snaps onto mounting
bracket.
page 4 of 7
shade onto back side
of mounting brackets.
shade onto back side
of mounting brackets.
BRACKET
ATTACHED
TO WALL
BRACKET
ATTACHED
SNAP
TO WALL
SNAP