Bosch WIS28440GB Betriebsanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Waschmaschine Bosch WIS28440GB herunter. Bosch WIS28440GB 8 Seiten. Front-loading washing machine
Auch für Bosch WIS28440GB: Installations- und Montageanleitung (10 seiten), Installations- und Montageanleitung (10 seiten), Installations- und Montageanleitung Handbuch (10 seiten), Betriebsanleitung (8 seiten), Installations- und Montageanleitung (10 seiten)

Bosch WIS28440GB Betriebsanleitung
Individual settings
Option buttons
You can change the spin speed and temperature beforehand and while the selected programme is running.
Effects dependent on the programme progress.
Temp.°C
You can change the indicated washing temperature. The maximum washing temperature which can be selected
depends on the set programme.
(rpm=Spin speed, revolutions per minute)/
spin)
You can change the indicated spin speed or select
water after the last rinse cycle).
The selectable maximum spin speed depends on the model and the selected programme.
Ready in
The respective programme duration is displayed by selecting the programme. The programme start can be delayed
before the programme begins. The
(Ready in) time can be set in hour steps up to maximum 24h.
Keep pressing the
(Ready in) button until the required number of hours is indicated (h=hour). Select
Pause. Settings cannot be made when the programme has started.
Additional functions
Overview of programmes, Page 7
+
Extension of the washing time for a more intensive washing of highly soiled washing.
Eco
Prewash
For heavily soiled washing. Prewash at 30 °C.
Reduced Ironing
Special spin sequence with subsequent fluffing. Gentle final spin at reduced spin speed.
Residual moisture of the washing slightly increased.
Aqua Plus
Increased water level. Additional rinse cycle. Longer programme duration.
For areas with very soft water or for further improvement of the rinsing result.
Start/Pause
For starting or interrupting the programme.
Signal
1. Activate setting mode
for signal volume
set to
... Button signals
2. Set volume for ...
set volume *
* If required,
select repeatedly
(Rinse stop = without final
(rinse stop = without final spin cycle, washing remains in the
+
1 step to right
select and
1 step to right
hold
... Information
direct
1 step to right
set volume *

Important information

Before using your washing machine for the first time
Do not put any washing in the washing machine! Turn the tap on. Pour into dispenser II:
– Approx. 1 litre water.
– Detergent (dosage according to manufacturer's instructions for light soiling and according to degree of water
hardness).
– Set programme selector to
At the end of the programme set the programme selector to Off.
Protecting the washing and the machine
– When dosing all detergents, cleaning aids and cleaning agents, always follow the manufacturer's instructions.
– Empty pockets.
– Remove metal parts (paper clips, etc.).
– Wash delicates in the net/bag (tights, curtains, underwired bras).
– Close zips, button up covers.
– Brush sand out of pockets and collars.
– Remove curtain fittings or include in the net/bag.
Insert laundry
Start/
Insert large and small items of washing!
Do not jam items of washing between the washing machine door and rubber seal.
Washing with different degrees of soiling
Light
Heavy
Soaking
Pour soaking agent/detergent into dispenser II according to the manufacturer's instructions. Set programme selector to
Cottons 30 °C and select
After the required soaking time reselect
Starching
Liquid starch can be used in all wash programmes. Pour starch into the fabric softener dispenser
to manufacturer's specifications (if required clean beforehand).
Dyeing/Bleaching
release
Dye in household quantities only. Salt may attack stainless steel! Observe specifications of the dye manufacturer!
Do not bleach washing in the washing machine!
Emergency release
The programme continues running when the power supply is restored.
If the washing is still to be removed, the door can be opened as described below:
Risk of scalding!
Detergent solution and washing may be hot. If required, leave to cool down.
Do not reach into the drum in case it is still rotating.
Do not open the door if you can still see water through the glass.
set to
1. Set programme selector to Off, pull out the mains plug.
2. Drain the water.
3. Pull down emergency release with a tool and release.
Door can then be opened.
5
Easy-Care 60 °C and select
Start/Pause.
Wash new items separately.
Do not prewash.
+
If required, pretreat stains. Select
Eco
additional function.
Load less washing. Select programme with Prewash .
+
If required, pretreat stains. Select
Eco
additional function.
Load washing of the same colour.
Start/Pause. After approx. 10 minutes select
Start/Pause if the programme is to be continued or change the programme.
Washing should not be treated with fabric softener.
e.g. if power failure occurs
Page 10
Start/Pause to stop the programme.
according
6